Tie Rod Assembly，Tie Rod End，Drag Link Supplier - Zhongming

1. To maintain the stability of the car, when the horizontal height of the left and right wheels is different, in order to prevent the torsion of the rod body, the balance rod will produce anti-roll resistance to inhibit the rolling of the body. 2. Improve the rigidity of the car. When the car turns the corner at high speed, the car will be somewhat twisted, and the balance rod is to maintain the rigidity of the vehicle relatively, prevent excessive deformation and distortion, and improve stability.

The ball head of the two front balance rods of the car is damaged and leaking oil, which will cause the accelerated wear of the ball head and cause the chassis noise, and it is recommended to go to the repair shop or 4S shop to replace it. The function of the balance rod is that when the horizontal height of the left and right wheels is different, in order to prevent the torsion of the rod body, the balance rod will produce anti-roll resistance to inhibit the rolling of the body. That is, when the left and right suspension moves up and down in sync, the balance bar will not work, only when the left and right suspension because of the uneven movement of the road surface or steering curve caused by the balance bar will work.

1.It is the joint part of the link suspension and balance rod that mainly plays the role of transferring the force of the automobile suspension and balance rod. 2.When the left and right wheels pass through the same road bumps or holes, the balance rod will not work. However, when the left and right wheels pass through different road bumps or holes, that is, when the horizontal heights of the left and right wheels are different, the torsion of the rod body will produce anti-tilt resistance to inhibit the rolling of the body. 3.the balance bar only in the action will make the road hardening unlike the hard spring will comprehensively make the road hardening if you want to completely rely on the spring to reduce the roll of the body. Balance pole ball head bad will have what effect: 1,four wheel positioning misalignment. This is the time to do four-wheel positioning. 4.the tire pattern on both sides is not the same or the pattern is not the same height. It is best to use the same type of tire for the whole car, at least the two tires of the front axle and the rear axle must be the same, and the depth of the pattern must be the same, and the wear limit must be replaced. 5.both sides of the tire pressure is not equal. Unequal tire pressure will make the tire become different size, rolling up will inevitably run off. 4, the front shock absorber spring deformation on both sides of the buffer is inconsistent. The shock absorber spring can be judged by comparing after pressing or disassembling.